Commercial Access & Barrier Systems
High-duty cycle automation for commercial facilities, corporate campuses, parking structures, and high-frequency vehicle checkpoints.
This barrier gate opener completes a full trip in as little as 0.7 seconds and handles arms up to 6 metres long. Rated for 10 million operating cycles — built for parking facilities, logistics sites, and high-traffic access points that open hundreds of times a day without stopping.
A parking facility running 500 trips a day takes 54 years to reach 10 million cycles. A logistics gate running 1,000 trips a day takes 27. This barrier gate opener is rated beyond the lifespan of the site it is installed on. The mean cycles between failures (MCBF) is rated at 2,000,000 — meaning the mechanism is designed to run 2 million cycles between any service event.
With a carbon fiber arm fitted, the barrier gate operator completes a full trip — arm up or arm down — in 0.7 seconds. Vehicles approach and the gate is already rising. The trip time is adjustable from 0.7 to 6 seconds on the carbon fiber arm and 0.9 to 6 seconds on the aluminium arm — set once to match your site's speed requirements. Straight arms reach up to 6 metres, fence-style arms up to 5 metres.
The controller connects to every major access method — press a button, tap an IC card, walk or drive through a microwave sensor, use a remote control, or connect a face recognition terminal. Every method works through the same controller. Configure one or several simultaneously to match your site's traffic flow and security setup.
This barrier gate operator's controller reacts before a fault becomes a breakdown. Connect a fire alarm signal and the barrier holds open automatically during an evacuation — no manual override needed. The motor absorbs 3 times its rated load without cutting out, so a stalled vehicle or a sudden gust doesn't shut the system down.
It's rated for 10,000,000 operating cycles, with a mean cycles between failures (MCBF) of 2,000,000. At 500 trips a day that's roughly 54 years of service; at 1,000 trips a day, about 27 years longer than the lifespan of most facilities it's installed in.
A full trip takes as little as 0.7 seconds with a carbon fiber arm fitted (0.9 seconds with aluminium). The trip time is adjustable from 0.7 to 6 seconds, so you can match it to your site's traffic speed and safety needs.
Straight arms reach up to 6 metres and fence-style arms up to 5 metres. Arm material and length affect trip speed, so longer arms are set toward the slower end of the adjustable range.
Five, all through one controller: push button, IC card, microwave sensor (walk or drive-through), remote control, and face recognition terminal. You can run one method or several at the same time.
Yes. Connect a fire alarm signal and the barrier holds open automatically for evacuation — no manual override needed. The 300W servo motor also absorbs up to 3× its rated load without cutting out, so a stalled vehicle or wind gust won't shut it down.
From -35°C to 70°C without modification. The same unit runs through a Canadian winter or a Gulf summer, at up to 2,000 m altitude and ≤95% non-condensing humidity.
A complete kit: the 300W 24V DC servo motor unit, spring mechanism rail (arm folds on impact to protect the motor), arm housing, programmable controller, power supply, 2 RF remotes, and an English manual with wiring diagram and parameter table.
Discover how this operator integrates into complete perimeter automation setups.
High-duty cycle automation for commercial facilities, corporate campuses, parking structures, and high-frequency vehicle checkpoints.
Continuous-duty gate operators capable of moving gates up to 4,000 kg, built for factories, logistics distribution hubs, and secure perimeters.